The Speed Bar Stool has a unique design with a prominent contrast between its seat and leg frame. A wide range of colors and upholstery gives you plenty of opportunities to personalize your look and style. Frame available in black, white, and chrome. Also available as counter height stool. Made in Sweden.
- Only trivalent eco-friendly chrome is used.
- Metal available in satin finish
- Customer's Own Material (COM) allowed
- Available in all standard RAL colors
- Special height available - please contact us for more information
- Seat foam is RISE (Research Institute of Sweden) certified
- Floor protectors
No tropical wood is used, only beech, birch, and oak. Our Formica PSM high-pressure laminate tops can be burnt after use without any emissions.
All steel parts are recyclable. Before we finish the chrome/lacquer, all grease/oil is removed by alkaline wash and then sent for destruction. The lacquering is produced by electrostatic epoxy powder coating that gives a minimum of waste. The electrostatic chrome (chrome 3) is recyclable.
The limited numbers of plastic parts that are used are recyclable by grinding. All upholstery and frames of synthetic material are entirely free of C.F.C. emissions.
All glue is water-based.
- Möbelfakta Certified
- Nordic Swan Ecolabel Certified
- EU Ecolabel Certified
UpholsteryWe work purely with selected suppliers, specializing in materials for the contract market. Johanson aims, as far as possible, to use Eco-labelled materials in our standard range.
Seat Frames and FoamOur frames meet the toughest demands and are tested at RISE (Research Institute of Sweden).
To offer top-quality furniture for the contract market, we have chosen to work with foam which meets the highest fire classification CMHRCombustion Modiﬁed High Resilience. CMHR is a polyurethane foam with better fire retardant features, compared with traditional foam. CMHR is standard on all upholstered Johanson products.
Fabric:Vacuuming is usually sufficient to clean the fabric. To remove stains, use lukewarm water and gently wipe (do not rub too much on the material). Always use a white cleaning cloth to avoid discoloration. For more stubborn stains, use a pH-neutral soap or a detergent suitable for that particular fabric. If this does not help, contact the supplier for further instructions.
Vinyl:Wipe with a dry soft cloth for regular cleaning. Do not use vacuum cleaners, this can scratch the surface. To remove stains, wipe or rub gently with a damp cloth. If this does not help, contact the supplier for further instructions. Remember to always finish by wiping the furniture with lukewarm water. Detergents can be ordered from Corium AB.
Leather:Wipe with a dry soft cloth for regular cleaning. Do not use vacuum cleaners, this can scratch the surface. To remove stains, wipe or rub gently with a damp cloth. Do not use chemical coatings, cleaners, or soap solutions. This does not help contact the supplier for further instructions. Remember not to place the furniture too near a heat source; leave a gap of 5-6 inches and avoid placing it in sunlight.
Felt:Vacuum or dust wipe gently. If stains, use lukewarm water and dry gently (do not rub on the material). If this does not help, contact the supplier for further instructions.
PUR (polyurethane):Wipe gently. To remove stains, use lukewarm water and mild detergent without solvents, alcohol, or abrasives. Dry with a soft cloth.
Laminate:Wipe gently with a soft, dry cloth. If stains, use a soft cloth with ammonia (window cleaner), which eliminates the need for drying streaks. Remember not to use abrasive detergents.
Metal:Wipe gently. If stains, use lukewarm water and mild detergent without solvents and abrasives. Dry with a soft cloth.
Wood/Laminate:Wipe gently. If stains, use lukewarm water and mild detergent without solvents and abrasives. Wipe off any moisture. Remember that wood is a living material, light from illumination and sunshine have some impact on the wood surface color and brightness. Therefore, wood can change in color and brightness.
Johan Lindstén’s products are characterized by a well-thought-out design and unexpected details in a creative process that optimizes function.
Johan wants his designs to interact with their surroundings in a way that influences the mood of the user. He draws inspiration from the most unlikely sources, such as the lilac bush outside his home or the Ocean of Storms on the moon. Johan Lindstén decided to be a furniture designer when he was only thirteen. He has studied industrial design at Växjö University and furniture design at Carl Malmsten CTD at Linköping University. Johan started his design studio after graduation.
In 1953 Börje Johanson came up with the idea to sew cushions and began a new company. That new company is now known as Johanson Design. Through the years, Johanson Design has reached an international audience by focusing on Scandinavian design and sterling furniture craftsmanship.Read More